Accessories Installation - Rcb Rk8S Originalbetriebsanleitung

Pedal marked "R", mounted on the right crank, locked clockwise with an open-end
spanner in the tool.
Pedal marked "L", mounted on the left crank, locked counterclockwise with the open-end
spanner in the tool.
5. SADDLE INSTALLATION
Pull the seat clamp quick
release trigger in the direction
shown in illustration.

6. ACCESSORIES INSTALLATION

Using the Phillips screwdriver in the
tool, loosen the screw on the bell
holder.
Deutsch
Insert the saddle pipe and
adjust the pipe to the
desired height.
Note: The height of the
saddle pipe must not be
higher than the safety line.
/ English / Français / Español / Italiano / Nederlands / Polski
Insert the bell holder into the handlebar in
the appropriate position, lock the screws
with a Phillips screwdriver.
(61)
1
Adjust the seat tube
clamp screw loosely,
snap the handle on and
lock the seat tube in
place.