RCB RK8S Originalbetriebsanleitung Seite 61

Adjust the handlebars to be parallel to
the front forks.
Twist the handlebars up and down to
adjust the crossbar to the right angle
and ensure that the handlebars are
centred.
2. FRONT WHEEL MOUNTING
Attaching the headlight,
fender with headlight
Pre-installed on the
forks with fixing screws.
Deutsch /
Tighten the screws with the
hexagonal spanner No. 5 in
the tool.
English / Français / Español / Italiano / Nederlands / Polski
Tighten the screws with the hexagonal
spanner No. 6 in tool 1., then fasten
the screw plugs.
Tighten the screws with the
hexagonal spanner No. 6 in the tool
and lock the handlebars.
(58)
Tighten the screw with the
socket No. 10 in the tool.