RCB RK8S Originalbetriebsanleitung Seite 63

Insert the quick release screw with the small part of the conical spring facing inwards as shown
in the illustration.
Tighten the quick release rob nut
as shown in the illustration.
3. REAR FENDER INSTALLATION
Using the hexagonal spanner No.5 in the tool, remove the mudguard stick fixing screws from
the left and right sides of the frame and attach the rear mudguard stick to lock it in place.
4. PEDAL INSTALLATION
Deutsch
Right pedal
/ English / Français / Español / Italiano / Nederlands / Polski
The pedal shaft is marked "R" for the
right pedal and "L" for the left pedal.
Left peda
(60)
After making sure that the
front wheel and fork are at
the same distance from
each other, adjust the
direction of the handle and
fasten the handle upwards.
Note: If the handle does not
work or is too loose during
this process, please adjust
the other side of the nut to
make it tighter.