RCB RK8S Originalbetriebsanleitung Seite 62

Using the hexagonal spanner No 4 in
the tool, remove the mudguard stick
fixing screws pre-installed on the left
and right side of the forks to lock the
fork sticks in place.
Fit the front wheel blades into the brake and the front wheel spindle into the fork hooks,
then clip into place.
Deutsch / English / Français / Español / Italiano / Nederlands / Polski
Loosen the screw shown in the picture
with the open-end spanner No. 15 in
the tool and remove the fork protection
shafts.
Unscrew the quick-release rob nut
and remove 1 pc conical spring.
(59)