RCB RK8S Originalbetriebsanleitung Seite 60

1. HANDLEBAR MOUNTING
Place the dust cover on the frame
head tube and insert the riser tube
down into the fork.
Note: The insertion should be over
the safety line scale.
Deutsch / English / Français / Español / Italiano / Nederlands / Polski
Parts details of RK8S:
1. 1 set of saddle and seatpost
2. 1 pair of footrest
3. 1pc Bell
4. 1pc dust cover
5. 1pc standpipe screw plug
6. 1 set of 16 in 1 tool
7. Front wheel quick release
8. 1 set of front mudguard
9. 1 set of front wheel set
Pre-tighten the screws with the
hexagonal spanner No. 6 in the
tool (do not lock completely)
(57)