Clock Functions - JUNO JB136D8 Benutzerinformation

three times and the Heat up indicator goes
out.
Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.
1. Touch .
The Temperature / Time display shows
the temperature in the appliance.
2. Touch to go back to the set
temperature or the display shows it
automatically after five seconds.
Fast heat up function
Do not put food in the oven
when the Fast heat up function
operates.

CLOCK FUNCTIONS

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
SET+GO
MINUTE MINDER
00:00 COUNT UP TIMER
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if
Faulty tone is activated in the settings
menu. Refer to "Using the settings menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold
seconds.
If you activate the Fast heat up function,
the bars on the display
one and
function operates.
Application
To show or change the time of day. You can change the
time of day only when the appliance is on.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE MIND‐
ER at any time and also when the appliance is off.
To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of
the appliance. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not activated if DURA‐
TION and END are set.
for more than three
flash one by
comes on to show that the
11