Parkside Performance PKHAP 20-Li C4 Originalbetriebsanleitung Seite 14

PARKSIDE app
This appliance supports ad-
vanced functions when using
special smart batteries. For
more information, refer to the
operating instructions for the
smart battery.
You can use the PARKSIDE app to monitor
the appliance and control certain functions.
The functions may change with app and
firmware updates. Further information on
the PARKSIDE app can be found in the
operating instructions for the smart battery.
Requirements
To find the appliance in the PARKSIDE app,
the following requirements must be met:
The PARKSIDE app is installed on your
■
smartphone and Bluetooth® is activated.
The following battery is installed in the
■
appliance:
PARKSIDE Performance Smart battery
PAPS 204 A1 or PAPS 208 A1. This bat-
tery has already been connected to the
PARKSIDE app.
The appliance communicates with the
app via the battery.
Ready2Connect LED
The Ready2Connect LED 5 lights up in the
following manner:
Connect the battery pack
LED flashes 3 times
Connect to the app
LED stays on
Not connected to the app
LED stays off
Tool in update mode
LED flashes continuously
Tool update successful
The LED flashes for 5 seconds
Tool update failed LED flashes
rapidly alternately
|
10
GB / CY
Connect the appliance to the
PARKSIDE app
1) Insert the smart battery.
2) Press the ON/OFF switch 2. The
Ready2Connect LED 5 flashes three
times. When the appliance is connected,
the LED lights up continuously.
3) Open the PARKSIDE app.
4) Your devices . The appliance is
displayed in the list. If the appliance is
not displayed in the list, add the appli-
ance manually.
Monitoring and controlling the
appliance
1) Your devices .
2) Select the appliance from the list.
The overview page of the appliance is
displayed.
3) Select the desired setting on the
overview page.
If you are unsure, select Help.
A dialogue window with a description of
the respective setting is displayed.
Deleting the appliance and data
from the app
1) In the Your devices tab, select
the appliance you want to remove and
whose data you wish to delete.
2) Tap the appliance in the list and drag it
to the left.
3) Confirm with "OK" or click on the
recycle bin .
The appliance is deleted.
Privacy policy
You can find the complete privacy policy
■
under the More tab in the "Privacy
policy" field.
Information about the app
You can find more information and
■
setting options under the More tab.