Installing The System In The Rack; Installing The Versarails Slide Assemblies - Dell PowerEdge 2650 Installationsanleitung

F i g u r e 1 - 6 . I n s t a l l i n g t h e V e r s a R a i l s S l i d e A s s e m b l i e s
slide assembly (2)
mounting-bracket
flange
10-32 x 0.5-inch
flange-head Phillips
screw (4 per slide
assembly)

Installing the System in the Rack

CAUTION: If you are installing more than one system, install the first system in
the lowest available position in the rack.
CAUTION: Never pull more than one component out of the rack at a time.
Pull the two slide assemblies out of the rack until they lock in the fully extended
1
position.
CAUTION: Because of the size and weight of the system, never attempt to install
the system in the slide assemblies by yourself.
Lift the system into position in front of the extended slides (see Figure 1-7).
2
front of rack
Rack Installation Guide
1-11