Installing The System In The Rack - Dell PowerEdge 1850 Installationsanleitung

Installing the System in the Rack

CAUTION:
If you are installing more than one system, install the first system in the lowest available
position in the rack.
1
Remove the optional system front bezel (if one is installed). See the procedures for removing
the bezel in the documentation provided with your system.
2
Place one hand on the front-bottom of the system and the other hand on the back-bottom
of the system.
3
Lift the system into position so that the side rails at the back of the system are aligned with
the mounting rails in the rack (see Figure 1-7).
CAUTION:
Because of the size and weight of the system, never attempt to install the system in the
mounting rails by yourself.
Figure 1-7. Installing the System in the Rack
thumbscrews (2)
release latches (2)
system rails (2)
mounting
rails (2)
Rack Installation Guide
1-13