Installing The System In The Rack - Dell PowerEdge 1955 Installationsanleitung

3 At the back of the cabinet, pull back on the mounting-bracket flange until the mounting
holes align with their respective holes on the back vertical rail.
4 Install three 10-32 x 0.5-inch flange-head Phillips screws in the back mounting flange
to secure the rail assembly to the back vertical rail.
5 Repeat steps 1 through 4 for the rail assembly on the other side of the rack.
NOTE:
Figure 1-6. Installing the VersaRails Rail Assemblies
flange-head
Phillips screws (3)

Installing the System in the Rack

CAUTION:
position in the rack.
CAUTION:
CAUTION:
by yourself.
12
Rack Installation Guide
Ensure that the rails are mounted at the same vertical position on both sides of the rack.
vertical rail
front of rack
If you are installing more than one system, install the first system in the lowest available
Never pull more than one component out of the rack at a time.
Because of the size and weight of the system, never attempt to install the system in the rack
rail assembly
mounting-bracket
flange
rail assemblies (2)