Cleaning, Maintenance And Storage - Murray Mu-Bat-Lm37-Kit Bedienungsanleitung Und Garantiekarte

User manual and warranty card
D: Hole center-to-center distance,
The diameter of the holes for the safety wedges is standardized and is 15.5 mm.
The shape of the knife indicates its features, depending on the shape of the knife is more
suitable for: Mowing with a basket, mowing with a side discharge or mulching. The factory-
used universal knife may prove to be less efficient than we would expect, so it is
recommended to buy accessory knives for each function, i.e. one for grinding, the other for
throwing grass into the basket, if the mower has such functions.
ATTENTION!
Take a break during operation, after every 15 minutes of operation - 15 minutes of rest.
Failure to do so will result in loss of warranty protection.

CLEANING, MAINTENANCE AND STORAGE

Warning: When the engine is running, the knives rotate.
• Before carrying out any repair or maintenance work, make sure that the mower is
switched off and disconnected from the mains (battery removed) and that there are no
children or third parties nearby.
• Keep all nuts, bolts, and screws in good condition to ensure that the machine will operate
safely.
• Check the grass container frequently for wear or damage.
• For rotor mowers, make sure that the correct type of knives are used.
Clean cutterbar housing
Clean the mower after use. Tilt the mower to the side. Use a brush to clean the inside
of the mower housing of grass and dust and, if necessary, protect the metal parts with anti-
corrosion agents. You can clean the entire mower with a damp cloth and possibly protect it
with paint paste. It is not allowed to wash the mower with a jet of water, water can damage
the electric parts of the mower.
Clean the vents regularly with compressed dry air. Do not insert sharp objects into the vents.
Storage
Store the mower in a well-ventilated area in a dry, dust-free place.
Make sure the grass basket is empty and cleaned properly. Rotting grass can damage the
basket.
Store only a working mower, if necessary, repair any faults before storing.
Sharpening the knife
If the blade is blunt, have it sharpened to a specialist MURRAY service. If the blade is
damaged or shows signs of imbalance, replace it with a new one. Switch off the appliance
before you replace the blade. Use strong gloves and hold the blade firmly. Use the wrench to
26
English