Description Of Functions; Technical Data - Parkside Performance Ppwsfa 20-Li C4 Originalbetriebsanleitung

24 Charging slot
25 Bracket (Keyless chuck)
26 Keyless chuck
27 Mounting flange
28 Uptake spindle
29 Storage case
Fig. A
30 Notch
31 Release lever (Guard cover)

Description of functions

The very fast rotating attachment tool
enables clean grinding, cutting or
brushing of metal.
Special attachment tools are provided
for each individual application. Please
refer to the information from the man-
ufacturer.
Please refer to the descriptions below
for information on how the operating
elements work.

Technical data

Cordless Flat Head Angle Grinder
...............................PPWSFA 20-Li C4
Rated voltage U ...................... 20 V ⎓
Protection type ............................IPX0
No-load rotation speed n
Weight with battery (20 V, 4 Ah)
................................................≈ 2.5 kg
Mounting flange ..............Ø 22.23 mm
Thread ......................................... M14
Thread length of the grinding spindle
..................................................12 mm
Sound power level (L
..............................95.1 dB; K
Sound pressure level (L
...............................87.1 dB; K
Vibration (a ) Angle grinding
h
– Handle ........ 2.439 m/s²; K=1.5 m/s²
– Auxiliary handle
....................... 3.745 m/s²; K=1.5 m/s²
−1
8500 min
0
)
WA
=3 dB
WA
)
pA
=3 dB
pA
Vibration (a ) Abrasive cutting
h
– Handle ........ 2.278 m/s²; K=1.5 m/s²
– Auxiliary handle
....................... 3.110 m/s²; K=1.5 m/s²
Battery .......................................Li-Ion
Temperature ............................ ≤50 °C
– Charging ............................. 4–40 °C
– Operation ........................−20–50 °C
– Storage ............................... 0–45 °C
PARKSIDE Performance Smart
battery Smart PAPS 204 A1/
Smart PAPS 208 A1/
Smart PAPS 2012 A1
– Frequency ƒ ......2400 – 2483.5 MHz
– transmitted power ............≤ 20 dBm
Roughing wheel PSS 125-6 A24QBF
(included)
Manufactured in compliance with EN
12413:2019
Disc rotational speed n
......................................≤ 12200 min
Disc speed v .........................80 m/s*
0
Outside diameter ...................125 mm
Borehole ......................... Ø 22.23 mm
Thickness .................................. 6 mm
* The grinding disc must withstand a
rotational speed of 80 m/s.
Levels of noise and vibration were de-
termined according to the standards
and regulations in the declaration of
conformity.
The specified total vibration value and
the stated noise emission value have
been measured according to a stand-
ardised test method and can be used
to compare one power tool with an-
other. The specified total vibration
value and the stated specified noise
emission value can also be used for a
provisional assessment of the load.
WARNING! The vibration and
noise emissions may deviate from
the specified values during actual
GB MT
max
−1
33