FILLING AND EMPTYING THE TANK
A
B
Open the tank and close the valve on syphon pump by turning it clockwise. Use a water
source which is located in a higher place than the tank. See figure (B) for how to fill
and figure (C) for how to empty the tank. Squeeze the pump 4 or 5 times, until the water
flows. Turn the knob counterclockwise to allow air to penetrate into the pump.
NOTES:
• Change water regularly to avoid water gets bacteria-infested.
• If the local water quality is poor; replace it with distilled water.
If you have any further questions, please contact us:
contact@vendomnia.com
C
EN
9