EN
2. Fasten the two wheels on the opposite side in the area of
the seat (labeled "Rail" in the drawing) as shown below.
3. Finally, attach the fifth wheel with 4 screws to the
Wooden board on the outside of the water tank.
STEP 7
Place the device in an upright position. Position the
recoil belt over all guide rollers and connect to the
bungee strap by hooking it into the ring.
Not correct / Correctly placed recoil belt
CHECK IF ALL BOLTS AND NUTS ARE TIGHTENED BEFORE USING THE DEVICE!
8
Bungee
Recoil belt
The recoil belt must be positioned
correctly over the guide rollers!
If you have any further questions, please contact us:
IMPORTANT:
contact@vendomnia.com