Assembly Instruction - Vendomnia Rdrgrt02 Original Bedienungsanleitung

We recommend to set-up the device with the assistance of a second person to avoid
injuries and damages.
STEP 1
1. Connect the rear spacer and the rails with 4 screws "B" as shown.
2. Then connect the folding system holder between the rails.
3. The plastic part that represents the handle should "face down".
STEP 2
1. Place the seat assembly onto the rails as shown.
2. Pay attention, that the larger vertically mounted wheels (the load wheels) are
placed onto the plastic extrusions on top of the rails and the smaller horizontally
mounted wheels (the guide wheels) are placed between the rails.
If you have any further questions, please contact us:
contact@vendomnia.com
Seat

ASSEMBLY INSTRUCTION

Rear spacer
Hex key
4x Screws "B"
EN
5