Werbung
Verfügbare Sprachen
Verfügbare Sprachen
52 | LA36
Certificate No.:
IECEx TUN 14.0021X
Date of issue:
2024-12-19
Manufacturer:
Linak A/S
Smedevænget 8, Guderup
6430 Nordborg
Denmark
Manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme
Rules, IECEx 02 and Operational Documents as amended
STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2017
Explosive atmospheres - Part 0: Equipment - General requirements
Edition:7.0
IEC 60079-31:2022
Explosive atmospheres
Edition:3.0
This Certificate does not indicate compliance with safety and performance requirements
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Report:
DE/TUN/ExTR14.0044/02
Quality Assessment Report:
GB/EXV/QAR22.0016/01
IECEx Certificate
of Conformity
Part 31: Equipment dust ignition protection by enclosure t
other than those expressly included in the Standards listed above.
Page 2 of 5
Issue No: 2
Werbung
