Werbung
Verfügbare Sprachen
Verfügbare Sprachen
48 | LA36
Schedule to EU-Type Examination Certificate TÜV 15 ATEX 143747 X Issue 00
Thermal data:
The permissible ambient temperature range during operation is -25 °C ... +65 °C.
(16) Drawings and documents are listed in the ATEX Assessment Report No. 23 203 334888.
(17) Specific Conditions for Use
1. The max duty cycle specified at an ambient of +25 °C.
LOAD 0-6800 [N]
STROKE
0-600 [mm]
600-1000 [mm]
LOAD 10000 [N]
STROKE
0-1000 [mm]
2. Ambient temperature area are specified to -25 °C ... +65 °C.
3. The power supply cable is of special design fulfilling IP 6X ingress protection. The cable can
be delivered in different lengths. Only cables delivered by Linak shall be mounted.
4. The connection between the actuator and the rest of the machine/device shall be conductive,
and furthermore the application shall be grounded in order to remove any Electro Static
Discharge. This counts for both of the actuator's fixation points (Back Fixture and Piston Rod
Eye).
5. The cable is not UV-resistant and shall be protected from direct sunlight.
6. The supply has to be protected by a fuse according to the electrical data.
7. The Linear Actuator has to be installed in such a way, that highly effective potential
electrostatic charges are prevented. The cleaning of the Linear Actuator shall be done only
with a damp cloth.
(18) Essential Health and Safety Requirements
No additional ones
P17-F-011
20% int. - Max. 2 [min.] continuous drive followed by 8 [min.] rest.
15% int. - Max. 3 [min.] continuous drive followed by 17 [min.] rest.
5% int. - Max. 1 [min.] continuous drive followed by 19 [min.] rest.
- End of EU-Type Examination Certificate -
This certificate may only be reproduced without any change, schedule included.
Excerpts or changes shall be allowed by the TÜV NORD CERT GmbH
Rev. 02/11.21
DUTY CYCLE
DUTY CYCLE
Page 3/3
Werbung
