Connecting The Appliance - Gaggenau Ac250121 Gebrauchs- Und Montageanleitung

Carefully tighten screws in succession until the appli-
4.
ance is flush-mounted on the ceiling.

Connecting the appliance

Press together the cable duct at the sides and re-
1.
move it.
Disconnect the cable at the appropriate point.
2.
Undo the opposite screws to loosen the fan box.
3.
T 20
Turn the fan box into the correct position according to
4.
the installation situation.
Push the fan box to the side and connect the appli-
5.
ance to the power supply.
Push the fan box to the other side and connect the
6.
pipework.
Position the fan box in the centre and screw it firmly
7.
in place.
Connect the cable.
8.
Press together the cable duct at the sides and attach.
9.
Installation instructions en
39