en Familiarising yourself with your appliance
4.2 Air recirculation
The air which is drawn in is cleaned by the grease filters
and an odour filter, and conveyed back into the room.
5 Familiarising yourself with your appliance
Familiarising yourself with your appliance
5.1 Controls
You can use the controls to configure all functions of
your appliance and to obtain information about the oper-
ating status.
Tip: Align the remote control as precisely as possible to
the infrared receiver for the LED display.
5.2 LED display
Die LED-Anzeige zeigt eingestellte Werte und Funktionen.
1 2 3 4 5
Fan setting 1/grease filter saturation display
Fan setting 2/odour filter saturation indicator
Fan setting 3
Intensive mode 1
1
Depending on the appliance specifications
26
To bind odours in air recirculation mode,
you must install an odour filter. The differ-
ent options for operating the appliance in
air circulation mode can be found in our
catalogue. Alternatively, ask your dealer.
The required accessories are available
from specialist retailers, from our after-
sales service or from the online shop.
"Accessories", Page 33
Switch the appliance on or off
Switching automatic mode
Increase the fan setting
Decrease the fan setting
Switch the intermittent ventilation on or off.
Home Connect Establishing a connection
Reset the filter saturation indicator
6
7
Intensive mode 2
Automatic mode
1
/fan run-on time/interval ventila-
tion
Home Connect
Infrared receiver
1
on or off
8