Safety Decals; Identification Of The Machine And Parts - Honda HF1211 Originalbetriebsanleitung

SAFETY DECALS

Your machine must be used with care. Therefore, decals have been
placed on the machine, to remind you pictorially of the main pre-
cautions to take during use. These decals are to be considered an
integral part of the machine.
If a decal should fall off or become illegible, contact your retailer to
replace it. Their meaning is explained below.
1
3
5
1 = Warning: Read Operatorʼs Manual before operating this machine.
2 = Warning: Disconnect the ignition key and read the instructions before
carrying out any repair or maintenance work.
3 = Danger! Ejected objects: Do not operate without either stone-guard or
grass-catcher in place.
4 = Danger! Ejected objects: Keep bystanders away.
5 = Danger! Machine rollover: Do not use this machine on slopes greater
then 10°.
6 = Danger! Dismemberment: Make sure that children stay clear of the
machine all the time when engine is running.
7
7 = Risk of being cut. Blade in movement. Do
8 = Avoid injury from getting caught in belt:
8
9
9 = Warning! Do not manipulate the microswitch
10 11
12
10 = Warning: Read the owner's manual before using the mower.
11 = Warning: The engine emits toxic carbon monoxide. Do not run in an
enclosed area.
12 = Warning! Petrol is highly flammable. Stop the engine before refueling.
13
13 = Warning: he muffler becomes very hot dur-
14
14 = This is a recyclable product. It contains
2
4
6
not insert hands or feet inside the blade
housing.
Do not operate the machine without shields
in place. Stay clear of belts.
ing operation and remains hot for a while af-
ter stopping the engine.
lead. Do not discard it in the environment
and dispose of in compliance with the laws
in force.
2. IDENTIFICATION OF THE MACHINE
AND PARTS
IDENTIFICATION OF THE MACHINE
The plate located under
the driverʼs seat has the
essential data and serial
number of each machine
(5).
This number must be quo-
ted when you require tech-
nical assistance or spare
parts.
1 6
1.
Acoustic power level according to directives
2000/14/EC, 2005/88/EC
2.
Conformity mark according to directives
2006/42/EC, 2005/88/EC, 2004/108/EC
3.
Year of manufacture
4.
Type of machine
5.
Serial number
6.
Weight in kgs
7.
Name and adress of manufacturer are written in the
"EC Declaration of Conformity" CONTENT OUTLINE
in this Owner's Manual.
8.
Engine nominal power
7 4 5
8 2 3
3 EN