Accessories On Request - Honda HF1211 Originalbetriebsanleitung

PROBLEM SITUATION
8. Uneven cut and
Key in «ON»,
poor grass collection engine running
9. Unusual vibrations
Key in «ON»,
while working engine running
If problems continue after having carried out these operations, contact your Dealer.
Do not take on complicated repair work if you don't have the necessary equipment and the technical knowledge.
WARNING!
The guarantee is automatically revoked and the manufacturer declines all responsibility for any repairs which are badly done.

9. ACCESSORIES ON REQUEST

1. STONE-GUARD KIT
CG99900090H0
For use in place of the grass-cat-
cher when the cuttings are not to
be collected.
2. KIT FOR "MULCHING"
CG99900036H0
It finely chops the grass cuttings
and leaves them on the lawn, in-
stead of collecting them in the
grass-catcher
For your safety it is strictly prohibited to fit
WARNING!
any other accessory other than those included in the above
list, they have been exclusively designed for the model and
type of machine you are using.
LIKELY CAUSE
– cutting deck not parallel to the ground
– blade cutting badly
– forward speed too high compared
to height of grass
– collector channel is obstructed
– cutting deck full of grass
– the blade is imbalanced
– blade loose
– fixing screws loose
– cutting deck is obstructed
SOLUTIONS
– check tyre pressures
– re-align the cutting deck to the ground
– check that the blade is fitted properly
– sharpen or replace the blade
– check the tension of the belt
– reduce forward speed and/or raise the cutting deck
– wait for grass to dry
– remove the grass-catcher and empty the collector channel
– clean the cutting deck
– balance or replace the damaged blade
– check that the blade is firmly fitted
– check and tighten all the fixing screws of engine
and the machine
– remove the grass-catcher, empty the collector channel
and clean the inside of the cutting deck
19 EN