Werbung
DECLARATION OF CONFORMITY
Wilo-Connect sensor LPWAN
We, the manufacturer, declare under our sole
responsibility that the products of the series,
(The serial number is marked on the product site plate)
in their delivered state comply with the following relevant directives and with the relevant national legislation:
_ Electrical Equipment (Safety) Regulations (SI 2016 No. 1101) amended
_ Radio Equipment Regulations (SI 2017 No. 1206) amended
_ Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment
Regulations (SI 2012 No. 3032) amended
comply also with the following relevant standards:
BS EN IEC 62311:2020; BS EN IEC 62368-1:2020+A11:2020;
ETSI EN 301 908-1 V15.2.1; ETSI EN 301 908-13 V13.2.1;
ETSI EN 301 489-1 V2.2.3; ETSI EN 301489-52 V1.2.1;
BS EN IEC 63000:2018;
Wilo (UK) Ltd
2nd Avenue, Centrum 100
Person who places the product on the market:
Burton upon Trent - DE14 2WJ
Staffordshire - United Kingdom
Dortmund,
WILO SE
Christoph TESCHERS
Wilopark 1
Group Vice President - Product Quality
D-44263 Dortmund, Deutschland
Declaration n°2223958-rev04
PC As-Sh n°2234767-GB-rev01
Werbung
