VEVOR RP8626 Bedienungsanleitung Seite 544

Trigger locked(gun will not spray)
Setup
Never attempt to assemble , change, or clean the gun,
tip, or tip guard without first relieving pressure from the
spray system. Follow the "Pressure Relief Procedure" in
the sprayer's Manual.
Always use a tip safety guard for added protection
against injection. Be ware that the guard alone will not
prevent injection. Never cut off tip guard! Always
engage gun trigger lock when the gun is not in use.
Before servicing equipment, consult owner's Manuals and follow all
warnings.
1. Set up the sprayer. Refer to the instructions in the sprayer's Manual.
2. Attach a grounded, airless spray hose to the material inlet on the gun. Using two
wrenches (one on the gun and one on the hose), tighten securely(4).
Trigger unlocked(gun will spray
- 8 -