VEVOR RP8626 Bedienungsanleitung Seite 545

2. With the tip and tip guard off the gun, start the sprayer. Flush and prepare the
spray system according to the sprayer's Owner's Manual. lnspect the spray
system to make sure that all fittings are secure and that there are no leaks.
3. Perform the "Pressure Relief Procedure" described in the sprayer's Owner's
Manual.
4. Using the arrow head on the tip handle, insert the tip seal and tip seal retainer
into backache of the tip guard(5).Press in for final adjustment.
5. Insert the tip into the slot on the tip guard(6).
6. Thread the tip guard onto the gun. Position the tip guard in the desired
spraying position and tighten securely.
NOTE: The arrow on the tip handle should be pointing in the forward
direction for spraying.
- 9 -