Readout Mode; Care And Cleaning - Pierenkemper PierenPlus basic Gebrauchsanweisung

Readout mode

If no values have been stored at the data memory of the PierenPlus basic, the LCD
display will show „NULL" for two seconds and return to standby mode. Otherwise the
LCD display shows the parameters used during the last therapy session (see fig.).
You have the possibility to store 90 paramaters, 30 days and 3 parameters each day.
Pushing the left [▼] button shows the operating parameters of the last therapy
day (until the first). Pushing the left [▲] button shows the operating parameters
of the next day (up to the latest). Pushing the right [▼] button shows the opera-
ting parameters of the last therapy session (until the first of the respective day).
Pushing the right [▲] button shows the operating parameters of the next therapy
session (until the last of the respective day). Pushing and holding the [ E ] for five
minutes deletes the data memory. The LCD display shows „CLr" for two seconds and
the PierenPlus basic returns to standby mode.
The PierenPlus basic turns-off automatically after two minutes if no key is pressed.

Care and cleaning

No special care and cleaning materials are required for the PierenPlus basic. The
PierenPlus basic can be cleaned with a soft, lint-free cloth. It is vital to ensure
62
Selected programme = P-01
Frequency = 100 Hz
Pulse width = 200 µs
Therapy time = 0 min 44 s
Therapy day = 5.
Therapy session = 3.