Pierenkemper PierenPlus basic Gebrauchsanweisung Seite 52

Programme 4: Gate control + low frequency
The two channels work with different frequencies but the same pulse width
(duration of therapy: 30 min).
Channel 1:
Frequency: 100 Hz
Pulse width: 200 µs
Programme 5: Adaptation
Following completion of phase 1 there is an automatic transition to phase 2
(duration of therapy: 30 min).
Phase 1:
Frequency: 100 Hz
Pulse width: 150 µs
Working time: 10 min
Programme 6: Han
The device alternates continuously between phase 1 and phase 2
(duration of therapy: 30 min).
Phase 1:
Frequency: 100 Hz
Pulse width: 150 µs
Working time: 3 s
Programme 7: Burst
Pulse packages (bursts) are generated with the specified parameters.
Frequency: 100 Hz
Pulse width: 150 µs
Modulation: Burst 0.5 s (0.25 s + 0.25 s)
Duration of therapy: 30 min
50
Channel 2:
Frequency: 2 Hz
Pulse width: 200 µs
Phase 2:
Frequency: 2 Hz
Pulse width: 200 µs
Working time: 20 min
Phase 2:
Frequency: 2 Hz
Pulse width: 200 µs
Working time: 3 s