1.CHANGING OIL
Drain the oil while the engine is still warm to assure rapid and complete
draining.
1.Remove the 12×15 mm oil drain bolt and sealing washer, remove the
oil filler cap, and drain the oil.
2.Reinstall the 12×15 mm oil drain bolt and sealing washer. Tighten
the bolt securely.
3.Refill with the recommended oil (see page 15) and check the oil level.
OIL FILLER CAP
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
34
SEALING
WASHER
12×15 mm OIL DRAIN BOLT
UPPER
LIMIT