Changing Oil - Honda EM25 Bedienungsanleitung

1.CHANGING OIL

Drain the oil while the engine is still warm to assure rapid and complete
draining.
1.Remove the oil filler cap and oil drain plug to drain the oil.
2.Install the oil drain plug, and tighten it securely.
3.Refill with the recommended oil (see page 14) and check the oil level.
4.Reinstall the oil filler cap securely.
SEALING WASHER
OIL DRAIN PLUG
OIL FILLER CAP
DIPSTICK
UPPER LIMIT
OIL FILLER HOLE
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
34