Honda EM4500CXS Bedienungsanleitung Seite 44

2.Remove the negative (–) cable from the battery negative (–) terminal,
and then remove the positive (+) cable from the battery positive (+)
terminal.
3.Remove the battery holder band.
BATTERY HOLDER BAND
POSITIVE (+) CABLE
4.Remove the battery from the battery tray.
Installation:
1.Install the battery in the generator.
2.Connect the battery positive (+) cable to the battery positive (+)
terminal first, and tighten the bolt securely.
3.Slide the battery boot over the positive (+) cable and terminal.
4.Connect the battery negative (–) cable to the battery negative (–)
terminal, and tighten the bolt securely.
5.Install the battery holder band.
BATTERY HOLDER BAND
BATTERY BOOT
POSITIVE (+) CABLE
BATTERY
NEGATIVE (–) CABLE
NEGATIVE (–) CABLE
41