OPTIONAL KIT PARTS
Wheel Kit Installation
1.Install the two wheels on the axle shaft using the plain washers and
split pins.
2.Install the axle assembly on the generator using four 8×16 mm
flange bolts and 8 mm flange nuts.
3.Install the two stands on the under frame using four 8×16 mm
flange bolts.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m , 17–22 lbf·ft)
8×16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
56
LONGER
UNDER FRAME
AXLE SHAFT
20 mm
PLAIN WASHER (2)
8 mm FLANGE NUT (4)
GENERATOR
SIDE
4.0×28 mm
SPLIT PIN (2)