Honda EM4500CXS Bedienungsanleitung Seite 61

Hanger Kit Installation
1.Position the hanger at the generator's balance point as shown below.
2.Fit the end tabs of the hanger through the bracket slots, and bolt the
brackets to the hanger and tighten securely.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m, 17–22 lbf·ft)
8×16 mm FLANGE BOLT (4)
58
HANGER
HANGER
280 mm (11 in)
HANGER
BRACKET (2)
GENERATOR
SIDE