Weller WX 1 Originalbetriebsanleitung Seite 20

Parameter menu
Password (lock function)
χПtОr sаТtМСТЧР tСО ХШМФ ПuЧМtТШЧ ШЧ, ШЧХв tСО iбОН
tОЦpОrКturО ФОвs МКЧ ЛО ШpОrКtОН ШЧ tСО sШХНО-
ring station. All other settings are disabled until the
repair station is unlocked again.
Notice
If you want only one temperature value to be
sОlОМtablО, tСО Мontrol kОвs iбОН tОmpОraturО
keys) must be set to the same temperature value.
Lock the soldering station:
Set the required three-character locking code (bet-
ween 001-999) with the turn-and-click wheel.
TСО ХШМФ Тs КМtТvО (tСО НТspХКв sСШаs К ХШМФ
sвЦЛШХ)έ
Vacuum pre-feed WXD 2 only
In order to prevent the pump from starting pre-
ЦКturОХв Шr tШ ОЧsurО К НОiЧОН sШХНОrТЧРάУШТЧt
prОСОКtТЧР tТЦО, Тt Тs pШssТЛХО tШ sОt КЧ τσ НОХКвέ
Vacuum run-on (WXD 2 only)
To prevent the desoldering iron from becoming
clogged, it is possible to set a vacuum run-on time.
Touchtones on/off
Option Description
ON On
OFF Off
36
www.valuetronics.com
Open Menu
Unlocking the soldering station
1. Call up the parameter menu. If the lock function
is active, the password menu item opens
КutШЦКtТМКХХвέ TСrОО stКrs (***) КrО sСШаЧ ШЧ
tСО НТspХКвέ
2. Set the three-character locking code using the
turn-and-click wheel.
3. ωШЧirЦ tСО МШНО аТtС tСО ϋЧtОr ФОвέ
Forgotten code?
Please contact our Customer
Service: technical-service@
weller-tools.com
Open Menu
Option Description
0 sec OFF: vacuum pre-feed function is OFF
(ПКМtШrв sОttТЧР)
τσμ vКМuuЦ prОάПООН tТЦО, ТЧНТvТНuКХХв
1-10
sec
Open Menu
Option Description
0 sec OFF: vacuum run-on function is OFF
(ПКМtШrв sОttТЧР)
τσμ vКМuuЦ ruЧάШЧ tТЦО, ТЧНТvТНuКХХв
1-10
sec adjustable
Open Menu
Station parameters
Station parameters
Station parameters
Station parameters