Weller WX 1 Originalbetriebsanleitung Seite 19

Parameter menu
Offset (Temperature-Offset)
The actual soldering-tip temperature can be
КНКptОН Лв ОЧtОrТЧР К tОЦpОrКturО ШППsОt КrШuЧН ±
40 °C (± 72 °F).
Perform. Mode
The function determines the heating characteris-
tics of the soldering tool to achieve the set tool
temperature.
Button lock WXHAP 200
TСТs ПuЧМtТШЧ МКЧ ЛО usОН tШ КНУust tСО ПКМtШrв
button presets of the WXAHP tool.
Process window
The temperature range set in the process window
НОtОrЦТЧОs tСО sТРЧКХ rОspШЧsО ШП tСО lШКtТЧР
switching output.
Notice
On tools with an LED ring light (e.g. WXDP 120),
tСО proМОss аinНoа НОinОs tСО illumination
characteristics of the LED ring light.
Language
中文
CHN
DEN Dansk
ENG English
ESP Español
FIN Suomi
Temperature version °C/°F (temperature units)
Option Description
° C Celsius
° F Fahrenheit
www.valuetronics.com
FRA Français
GER Deutsch
εКРвКr
HUN
ITA Italiano
POR Português
Open Menu
Open Menu
Option Description
χНКptОН (ЦОНТuЦ) СОКtТЧР (ПКМtШrв
Standard
setting)
Min. Slow heating
Max. rapid heating
Open Menu
Option Description
–
OFF
ON The WXHAP 200 is switched on the
irst tТЦО tСО ЛuttШЧ Тs prОssОН КЧН
switched off the next time the button is
pressed.
Open Menu
If the LED is continuously illuminated, this means
that the preselected temperature has been
reached or that the temperature is within the
predetermined process window.
A lasСinР δED inНiМatОs tСat tСО sвstОm is
heated or that the temperature is outside the
process window.
Open Menu
P
RUS
SWE Svenska
TUR Türkçe
日本語
JPN
POL Polski
Open Menu
Tool parameters
Tool parameters
Tool parameters
Tool parameters
Station parameters
KOR 한국말
CZE ČОsФý
Station parameters
35