Rational CombiMaster Plus 6-2/3 Bedienungsanleitung Seite 24

1 | MI_2218: Modification instruction drain pump for tabletop and floor units
7. Connect all three cables to the control board.
Notice: All cables are poka yoke. The DIP switches must be set for each
specific unit.
- (1) Power supply control board
- (2) Connection plug from the cable trunk (if there is no plug, please note
L1, N and PE)
- (3) Connection SC-pump and control board
- (4) Note the switching positions as shown in the table.
24 / 208
SW1