Listening To Radio; Presetting Stations - Samsung HT-D5200 Benutzerhandbuch

Listening to Radio

Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
•
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH (
station.
•
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/
CH ( ) button to tune in to a lower or higher
frequency.
•
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH (
search the band.
Setting Mono/Stereo
Press the MO/ST button.
•
Each time the button is pressed, the
sound switches between STEREO and
MONO.
•
In a poor reception area, select MONO
for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory
1. Press the FUNCTION button to select FM.
Press the TUNING/CH (
2.
<89.10>.
3. Press the TUNER MEMORY button.
•
NUMBER fl ashes on the display.
4. Press the TUNER MEMORY button
again.
•
Press the TUNER MEMORY button
before NUMBER disappears from the
display.
•
NUMBER disappears from the display and
the station is stored in memory.
5. To preset another station, repeat steps 2 to 4.
•
To tune in to a preset station, press the
TUNING/CH (
channel.
HT-D5200_ELS_0310.indd 51 HT-D5200_ELS_0310.indd 51
) button to select the preset
) button to automatically
) button to select
TUNER
MEMORY
C
) button to select a
About RDS broadcasting
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station
names, as well as information about what type of
program they broadcast, such as sports or
music, etc.
When tuned to an FM station which provides the
RDS service, the RDS indicator lights up on the
display.
Description on RDS function
•
PTY (Program Type) : Displays the type of
program currently being broadcast.
•
PS NAME (Program Service Name) : Indicates
the name of broadcasting station and is
composed of 8 characters.
•
RT (Radio Text) : Decodes the text broadcast
by a station (if any) and is composed of
maximum 64 characters.
•
CT (Clock Time) : Decodes the real time clock
from the FM frequency. Some stations may not
transmit PTY, RT or CT information therefore
this may not be displayed in all cases.
•
TA (Traffi c Announcement) : TA ON/OFF it
shows that the traffi c announcement is in
progress.
✎
NOTE

RDS may not operate correctly if the station
tuned is not transmitting RDS signal properly
or if the signal strength is weak.
51
English
2011-03-15 ¿ÀÀü 8:51:01 2011-03-15 ¿ÀÀü 8:51:01