Listening To Radio; Presetting Stations - Samsung HT-D330 Bedienungsanleitung

S/W LEVEL
You can also press the S/W LEVEL button on the
remote control and use the ◄ or ► buttons to adjust
the level of subwoofer.
Press the S/W LEVEL button.
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio
mode, P.Bass or MP3 Enhancement function.
Press the PL II button.
MP3 ENHANCE ON ➞ POWER BASS ON
➞ POWER BASS OFF ➞ MUSIC ➞
MOVIE ➞ PROLOG ➞ MATRIX ➞ STEREO
✎
NOTE

When selecting Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only
one of the inputs (L or R), you cannot listen to
surround sound.

The Pro Logic II function is only available in
Stereo mode.

The Pro Logic II function is not available while
playing AC3 signal in 2.1 channel mode.

Listening to Radio

Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
•
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING (
station.
•
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING
( ) button to tune in to a lower or higher
frequency.
HT-D330-XU_ENG-1228.indd 25 HT-D330-XU_ENG-1228.indd 25
P L
) button to select the preset
•
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING ( ) button to automatically search the
band.
Setting Mono/Stereo
Press the MO/ST button.
•
Each time the button is pressed, the
sound switches between STEREO and
MONO.
•
In a poor reception area, select MONO
for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the TUNING (,,.) buttons to select
<89.10>.
3. Press the TUNER MEMORY button.
•
Number fl ashes on the display.
4. Press the TUNING (,,.) buttons to
select preset number.
•
You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
•
Press the TUNER MEMORY button before
number disappears from the display.
•
Number disappears from the display and the
station is stored in memory.
6. To preset another station, repeat steps 2 to 5.
25
English
2011-12-28 2011-12-28 12:00:45 12:00:45