Listening To Radio; Presetting Stations - Samsung HT-D450 Bedienungsanleitung

Listening to Radio

Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
Preset Tuning 1 : You must first add a desired
~
frequency as a preset. Press the STOP (@)
button to select PRESET and then press the
TUNING/CH(
station.
Manual Tuning : Press the STOP (@) button to
~
select MANUAL and then press the TUNING/CH
( ) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP (@) button
~
to select MANUAL and then press and hold the
TUNING/CH(
search the band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
~
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a clear,
~
interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 in the memory
1.
Press the FUNCTION button to select FM.
2. Press the TUNING/CH (
<89.10>.
3. Press the TUNER MEMORY button.
Number flashes on the display.
~
4. Press the TUNING/CH (
to select preset number.
~ You can select between 1 and 15 presets.
HT-D450-XU-ENG-0303.indd 35
) button to select the preset
) button to automatically
) button to select
) buttons
5. Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before
~
number disappears from the display.
Number disappears from the display and the
~
station is stored in memory.
6. To preset another station, repeat steps 2 to 5.

English
2011-03-05 11:38:18