Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The brush can be swung 20 degrees to either side. Press the steering lever; turn the brush to the
desired angle, release the steering lever and the catch will fall correctly into place.
Idle speed
Set throttle control lever to its "SLOW" position to reduce stress on the engine when working is not
being performed. Lowering the engine speed to idle the engine will help extend the life of the
engine, as well as conserve fuel and reduce the noise level of the machine.
Stopping engine
To stop the engine in an emergency, simply turn the engine switch to the OFF position. Under normal
conditions, use the following procedure.
1. Move the throttle lever to the SLOW position.
2. Let engine idle for one or two minutes.
3. Turn the engine switch to the OFF position.
4. Turn the fuel valve lever to the OFF position.
Do not move chock lever to the CLOSE position to stop engine. Backfire or engine
damage may occur.
MAINTENANCE
A proper maintenance and lubrication will help the machine in a perfect working condition.
Preventive maintenance
Turn off engine and disengage all command levers. Engine must be cool.
EN
Werbung
