Technical Data - Breezy UniX Gebrauchsanweisung

Technical Data

Overall width:
• With standard wheels including handrims, close mount:
UniX: SW +19 cm
• With drum brake wheels including handrims, close mounted:
UniX: SW +20 cm
Folded dimensions:
• With standard wheels:
UniX: 31 cm
• Without standard wheels:
UniX: 30 cm
Weight in kg:
Maximum load:
UniX
According EN12183: 2009 all there listed parts (seat - back upholstery, arm pad, side panel...) are fire resistant according EN1021 Part 1/2
Maximum occupant mass (test dummy mass): 125 kg
Overall length with legrest
Overall width
Folded length
Folded width
Folded height
Total mass
Mass of the heaviest part
Static stability downhill *
Static stability uphill with
anti-tips *
Static stability sideways *
Minimum turning radius
Front seat height Castor position
47 cm
51 cm
*
The Dynamic safe slope is dependant on the chair configuration, the users abilities and the style of riding. As the users abilities and style of
riding cannot be pre-determined then the max safe slope cannot be determined. Therefore this must be determined by the user with the
assistance of an attendant to prevent tipping. It is strongly recommended that inexperienced users have Ant-tips fitted.
The wheelchair conforms to the following standards:
a) Requirements and test methods for static, impact and fatigue strengths (ISO 7176-8)
b) Power and control system for electric wheelchairs requirements and test methods (ISO 7176-14)
c) Climatic test in accordance with ISO 7176-9
d) Requirements for resistance to ignition in accordance with ISO 7176-16 (EN 1021-1/2)
13
Unix Rev 1
up to a load of 125 kg
min. max.
975 mm 1090 mm
610 mm 700 mm
975 mm 1090 mm
300 mm 310 mm
970 mm 970 mm
18 kg 19.4 kg
- 2,0 kg rear
wheel 24"
with drum
break
10° 10°
10° 10°
10° 10°
830 mm 850 mm
Rear wheel position
1 A
3 B
Weight in kg:
Transportation (without footrest, wheels)
Footrest (unit):
24" rear wheels (solid) (pair):
To lift or carry the wheelchair without wheels and hangers grab the upper
sideframe and the back tube or the middle of the seat upholstery
Seat plane angle
Effective seat depth
Effective seat width
Seat surface height at front
edge
Backrest angle
Backrest height
Footrest to seat distance
Leg to seat surface angle
Armrest to seat distance
Front location of armrest
structure
Hand rim diameter
Horizontal location of axle
12.2 - 13.4 kg
...1 kg
3.8 kg
min. max.
3° 3°
420 mm 420 mm
410 mm 500 mm
520 mm 520 mm
79° 80°
425 mm 425 mm
360 mm 520 mm
115° 115°
220 mm 220 mm
183 mm 313 mm
530 mm 535 mm
0 mm (24") + 20 mm (12")
Yes •
N/A •
N/A •
Yes •
UniX Rev 1