Eu-Type Examination Certificate - Linak La36 Montageanleitung

38 | LA36
Translation

EU-Type Examination Certificate

(1)
(2) Equipment and protective systems
intended for use in potentially
explosive atmospheres, Directive 2014/34/EU
(3) Certificate Number
(4) for the product:
(5) of the manufacturer:
(6) Address:
Order number:
Date of issue:
(7) The design of this product and any acceptable variation thereto are specified in the schedule to this
EU-Type Examination Certificate and the documents therein referred to.
(8) The TÜV NORD CERT GmbH, Notified Body No. 0044, in accordance with Article 17 of the Directive
2014/34/EU of the European Parliament and the Council of 26 February 2014, certifies that this
product has been found to comply with the Essential Health and Safety Requirements relating to the
design and construction of products intended for use in potentially explosive atmospheres given in
Annex II to the Directive.
The examination and test results are recorded in the confidential ATEX Assessment Report
No. 23 203 334888 .
(9) Compliance with the Essential Health and Safety Requirements has been assured by compliance
with:
EN IEC 60079-0:2018/AC:2020-02
except in respect of those requirements listed at item 18 of the schedule.
(10) If the sign "X" is placed after the certificate number, it indicates that the product is subject to the
Specific Conditions for Use specified in the schedule to this certificate.
(11) This EU-Type Examination Certificate relates only to the design, and construction of the specified
product. Further requirements of the Directive apply to the manufacturing process and supply of
this equipment. These are not covered by this certificate.
(12) The marking of the product shall include the following:
II 2 D Ex tb IIIC T135
TÜV NORD CERT GmbH, Am TÜV 1, 45307 Essen, notified by the central office of the countries for safety engineering
(ZLS), Ident. Nr. 0044, legal successor of the TÜV NORD CERT GmbH & Co. KG Ident. Nr. 0032
The deputy head of the notified body
Hanover office, Am TÜV 1, 30519 Hannover, Tel. +49 511 998-61455, Fax +49 511 998-61590
P17-F-011
TÜV 15 ATEX 143747 X
Linear Actuator, Model: LA36 series
LINAK A/S
Smedevænget 8, Guderup
6430 Nordborg
Denmark
8003051498
See date of signature
C Db
o
Digital unterschrieben
von Drews Anke
Datum: 2023.12.20
20:12:21 +01'00'
This certificate may only be reproduced without any change, schedule included.
Excerpts or changes shall be allowed by the TÜV NORD CERT GmbH
Rev. 02/11.21
Issue:
EN 60079-31:2014
00
Page 1/3