Philips AVENT SCD553 Bedienungsanleitung Seite 9

- Keep all parts away from heated surfaces to avoid overheating and
deformation of these parts.
Before first use
Disassemble, clean and disinfect all parts that come into contact with the
breast and breast milk before you use the breast pump for the first time and
after each use.
Fully charge the device before you use it for the first time or after a long period
of non-use.
Cleaning and disinfecting
- Disassemble, clean and disinfect the following parts before first use and
after every use: membrane, cup, valve, breast shield, insert (if used), breast
shield (dust) cover.
- Clean the front cap, silicone tube, tube coupler (included with the double
breast pump), carrying cord, USB cable, and motor unit (including the clip)
when needed. Wipe with a clean, damp cloth with water and mild
detergent.
Step 1: Disassembling
Completely disassemble all parts that come into contact with the breast and
breast milk. Make sure that you:
- Remove the valve from the cup.
- Separate the membrane and front cap.
- Remove the insert (if used) from the breast shield.
9
English