Philips AVENT SCD553 Bedienungsanleitung Seite 10

10
English
Step 2: Cleaning
Warning: Do not use antibacterial or abrasive cleaning agents to
clean the breast pump parts as this may cause damage.
Caution: Never put the motor unit in water or in a dishwasher, as this
causes permanent damage to it.
Clean the following parts before first use and after every use: membrane, cup,
valve, breast shield, insert (if used), breast shield (dust) cover. You can clean
these parts manually or in the dishwasher.
Manual cleaning
Caution: Be careful when you remove and clean the valve. If it gets
damaged, your breast pump does not function properly. To clean the
valve, rub it gently between your fingers in warm water with some
dishwashing liquid. Do not insert objects into the valve, as this may cause
damage.
1 Rinse the parts under a running tap with lukewarm water.
2 Soak the parts for 5 minutes in warm water with some mild dishwashing
liquid.
3 Clean the parts with a cleaning brush in warm water with some mild
dishwashing liquid.
4 Thoroughly rinse the parts under a running tap with drinking-quality water.
5 Leave the parts to air-dry on a clean tea towel or drying rack.
Cleaning in the dishwasher
Note: Food colorings may discolor parts.
1 Place all parts on the top rack of the dishwasher. Use a dishwasher basket
for the smallest parts.
2 Put detergent or a dishwashing tablet in the machine and run a standard
program.
3 Leave the parts to air-dry on a clean tea towel or drying rack.
Step 3: Disinfecting
Caution: During disinfection with boiling water, prevent the parts from
touching the sides and bottom of the pot. This can cause irreversible
product deformation or damage that Philips cannot be held liable for.
Disassemble, clean and disinfect the following parts before first use and after
every use: membrane, cup, valve, breast shield, insert (if used), breast shield
(dust) cover.