Attaching And Removing The Protective Cover; Attaching And Removing The Splinter Guard; Checking The Battery Charge Level; Charging The Battery - Parkside Pstda 20-Li C3 Originalbetriebsanleitung

3. If the external dust extraction does
not fit, use the additional reducer
piece (7).
Removing external dust extraction
1. Remove the dust extraction from
the suction nozzle (6) or reducer
piece (7).
2. Remove the reducer piece (7).
Attaching and removing the
protective cover
Attaching the protective cover
1. Press the two holders on the pro-
tective cover (21) into the recesses
on the device housing.
The protective cover clicks into
place.
You can fold the fitted protective cov-
er up by 65°.
Removing the protective cover
1. Carefully press the two holders on
the protective cover (21) apart.
2. Pull the protective cover to the
front.
Attaching and removing the
splinter guard
Attaching the splinter guard
1. Press the splinter guard (25) into
the recess in the slide shoe (24).
Removing the splinter guard
1. Press the splinter guard (25) out of
the recess in the slide shoe (24).
Checking the battery
charge level
LEDs
red, orange, green Battery charged
red, orange
red
Meaning
Battery partially
charged
Battery needs to
be charged
1. Press the button (31) next to the
charge level indicator button (30)
on the battery (4).
The LEDs of the charge level in-
dicator show how much charge re-
mains in the battery.
2. Charge the battery (4) when only
the red LED on the charge level in-
dicator (30) is illuminated.

Charging the battery

See also the charger instruction
manual.
Notes
• If warm, allow the battery to cool
before charging.
• Do not expose the battery to dir-
ect sunlight for long periods and
do not place it on a radiator (max.
50°C).
Charging the battery
1. Remove the battery (4) from the
device.
2. Push the battery (4) into the char-
ging slot of the battery charger
(29).
3. Connect the battery charger (29) to
a power outlet.
4. After charging, disconnect the bat-
tery charger (29) from the mains.
5. Pull the battery (4) out of the bat-
tery charger (29).
Control LEDs on the charger (29):
green red
lights up —
— lights up Battery is char-
GB MT
Meaning
• Battery is fully
charged
• stand-by (No
battery inser-
ted)
ging
35