Preparation; Control Elements; Attaching And Removing The Slide Shoe; Attaching And Removing The Saw Blade - Parkside Pstda 20-Li C3 Originalbetriebsanleitung

tool is in operation. Under certain cir-
cumstances, this field may negat-
ively affect active or passive med-
ical implants. In order to reduce the
danger of serious or fatal injuries, we
recommend that individuals who wear
medical implants should consult their
doctor and the manufacturer of the
implant before operating the tool.

Preparation

WARNING! Risk of injury due to
unintentional start-up. Only insert
the battery into the device once the
device is fully prepared for use.

Control elements

Familiarise yourself with the operating
elements before using the device for
the first time.
• Switch lock (1)
• Locks the on/off switch against
unintentional operation.
• Unlocking: Press
• On/Off switch (2)
• Switching on: Press
• Switching off: Release
• Pendulum stroke switch (13)
Set pendulum movement of the
saw blade in 4 positions:
• 0 - no pendulum motion
• 1 - small pendulum motion
• 2 - medium pendulum motion
• 3 - large pendulum motion
• Switch (dust blower function)
(10)
Blower function for chip-free cut-
ting line
⭠
disable
Attaching and removing the
slide shoe
When working on scratch-sensitive
workpieces, working with the slide
shoe (9) is recommended.
Assembling the slide shoe (Fig. A)
1. Place the slide shoe (9) on the
2. Press the notches (8) on the back
Disassembling the slide shoe
(Fig. A)
1. Press the slide shoe (9) on the
2. Pull the slide shoe (9) forward,
Attaching and removing the
saw blade
Requirements
• The saw blade has a T-shank
• The saw blade is suitable for the
• The chuck is free of splinters or
Installing the saw blade (Fig. B)
1. Turn the release of the chuck (23)
⭢
enable
front of the footplate (12).
of the slide shoe over the footplate
(12).
notches (8) away from the foot-
plate (12).
away from the footplate (12) and
off.
CAUTION! Risk of injury
when touching the saw blade.
Wear protective gloves when
handling the saw blade.
mount (single lug shank) like the
supplied saw blades (16/17/18).
respective material.The scope of
delivery for the device includes
large-toothed saw blades for wood
and a fine-toothed saw blade for
metal and plastic.
other material residue.
as far as possible. Keep the re-
lease of the chuck fixed in this po-
sition.
GB MT
33