Residual Risks - Parkside Pstda 20-Li C3 Originalbetriebsanleitung

GB MT
power tool "live" and could give
the operator an electric shock.
• Use clamps or another practic-
al way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your
hand or against the body leaves it
unstable and may lead to loss of
control.
• Only use accessories recom-
mended by PARKSIDE. Unsuit-
able accessories may cause elec-
tric shock or fire.
Further safety instructions for
reciprocating saws
• Keep hands away from the saw-
ing area. Do not reach underneath
the workpiece. Upon contact with
the saw blade there is a risk of in-
jury.
• Only when the power tool is
turned on should the sawing
blade be moved against the
workpiece. Otherwise, there is a
risk of kickback if the attachment
tools jam in the workpiece.
• Make sure that the footplate is
secure during sawing. A tilted
saw blade may break or cause a
kickback.
• After you have finished work,
turn the power tool off and do
not pull the saw blade out of the
cut until it has come to a stand-
still. In this way you will avoid any
kickback and can safely put down
the power tool.
• Use only undamaged saw blades
in perfect condition. Bent or blunt
saw blades can break, adversely
affect the cut or cause kickback.
• Do not brake the saw blade after
switching the device off by ap-
plying side pressure. The saw
blade may be damaged, break or
cause a kickback.
32
• Do not touch any objects or the
ground with the saw running.
There is a risk of kickback.
• Hold the power tool tightly with
both hands while working and
ensure a secure footing. The
power tool is guided more securely
with both hands.
• Switch the appliance off imme-
diately if the sawing blade jams.
Force apart the saw cut and pull
the saw blade out carefully. This
can lead to loss of control over the
power tool.
• Use suitable detectors to de-
termine if there are hidden sup-
ply lines or contact the local util-
ity company for assistance. Con-
tact with electric cables can cause
fire and electric shock. Damaging
gas lines can lead to explosion.
Breaking water pipes causes prop-
erty damage.
• Always wait until the power tool
has come to a complete stop be-
fore placing it down. The applica-
tion tool can jam and cause you to
lose control of the power tool.

Residual risks

There will always be residual risks
even if you operate this device ac-
cording to the instructions. The fol-
lowing hazards may occur in connec-
tion with the type and design of this
device:
• Hearing damage if suitable ear pro-
tection is not worn.
• Health injuries resulting from the
effect of hand/arm vibration in the
event that the tool is used over a
longer period of time or is not used
and maintained properly.
• Cutting injuries
WARNING! Danger due to elec-
tromagnetic field generated while the