Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 50

5. Maintain power tools and
accessories. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
7. Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
di erent from those intended could
result in a hazardous situation.
8. Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool
in unexpected situations.
Battery tool use and care
1. Recharge only with the charger
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
2. Use power tools only with
packs. Use of any other battery
packs may create a risk of injury and
fire.
48 GB/IE
3. When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another. Shorting the battery
terminals together may cause burns
or a fire.
4. Under abusive conditions,
battery; avoid contact. If contact
I
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
5. Do not use a battery pack for
Damaged or modified batteries
exhibit unpredictable behaviour
resulting in fire, e plosion or risk of
injury.
6. Do not expose a battery pack
temperature. E posure to fire or
temperature above 130 C may
cause explosion.
7. Follow all charging instruction and
do not charge the battery pack
or tool outside the temperature
A
Charging improperly or at
temperatures outside the specified
range may damage the battery and
increase the risk of the fire.
Service
1. Have your power tool serviced
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
2. Never service damaged battery
packs. Service of battery packs
should be only be performed by the
manufactured or authorized service
providers.