Herunterladen Diese Seite drucken

Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 59

20 v akku-rucksackdrucksprüher

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Insert the desired nozzle
o
accessory 
into one end of the
[
]
plastic nozzle pipe 
Push the O ring 
o
and the union nut 
thread on the nozzle accessory 
Turn the union nut 
o
direction to tighten it on the thread of
the nozzle accessory 
Choosing the suitable nozzle
accessory
Nozzle
Fan nozzle 
Double
head
nozzle
Single
head
nozzle
Mist
nozzle
NOTE
Only use the nozzles and filters
u
supplied with the product.
˜ Mixing the spray solution
WARNING!
m
Mix the chemicals strictly
u
in accordance with the
manufacturer's instructions.
Incorrect mixtures may produce
toxic fumes or explosive solutions.
Mix only the amount of liquid you
u
need for the application.
.
[
]
, security ring 
[
]
[
towards the
[
]
.
[
]
in a clockwise
[
]
.
[
]
Application
Uniform spray
pattern
Spraying large
areas
Spraying large
crops
High ow rate
Spraying small
areas
Spraying large
crops
Spraying mist
High ow rate
WARNING!
m
Risk of accidental contact of
u
spray materials with skin and
]
eyes! Always wear appropriate
personal protection equipment
as instructed by the chemical
manufacturer when using,
preparing, handling, spraying,
or disposing of chemicals. This
equipment includes at least
goggles, gloves, respiratory
protection and protective clothing.
Never spray liquid plant control
 
chemicals undiluted.
Prepare solution and fill the
 
spray tank 
well-ventilated locations.
Mi and fill only in areas where spray
 
spills can be easily contained.
Have su cient spare rags available
 
to adsorb any spills immediately.
Prepare a quantity of solution
 
su cient only for the job at hand so
that nothing is left over.
Do not mi di erent chemicals
 
unless such mixture is approved by
the manufacturer.
Liquids to be sprayed must be as
 
thin as water. Thicker liquids cannot
be sprayed properly.
Avoid contaminating the
 
environment, the water supply and/
or public sewer systems with the
spraying agent.
Any unused leftovers of spraying
 
agents must always be collected in
a suitable container and dis-posed
of by local or national regulatory
authorities.
Avoid any direct contact with
 
spraying agents. In case of contact
with sprays, immediately rinse the
a ected parts of the body with plenty
of clean water. Seek medical advice
if needed.
outdoors only or in
3 ]
[
GB/IE
57

Werbung

loading

Diese Anleitung auch für:

465838 2404