Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Gear selection
m
ATTENTION! RISK OF PRODUCT
DAMAGE!
Do not operate the gear selector
until the product has come to a
[
4 ]
standstill.
Change the gear by sliding the gear selector
forwards or backwards (fig. F).
4 ]
[
1
gear:
st
Suitable for:
Speed:
Torque:
2
gear:
nd
Suitable for:
Speed:
Torque:
˜ Setting the rotating direction
m
ATTENTION! RISK OF PRODUCT
DAMAGE!
Do not operate the rotation direction
switch
until the product has come to
[
5 ]
a standstill.
Change the direction of rotation by pressing
the rotation direction switch
left or right (fig. G).
When the rotation direction switch
the middle position, the on/off switch
locked.
18 GB
Screwing
Low
High
Drilling
High
Low
towards the
5 ]
[
is in
5 ]
[
is
6 ]
[
˜ Torque control
This product is equipped with a torque control that
disengages the spindle when a predefined torque
is exceeded.
The torque can be adjusted by turning the
torque sleeve
(fig. H).
[
3 ]
Small screws or soft materials: Select a low
level.
Large screws, hard materials or removing
screws: Select a high level.
For drilling operation: Turn the torque sleeve
to the
position.
[
3 ]
˜ Switching on and off
NOTE
The on/off switch
[
6 ]
Switching on: Press and hold the on/off
switch
.
[
6 ]
Regulate the speed as required (see "Speed
control") (fig. I).
Switching off: Release the on/off switch
.
[
6 ]
˜ Speed control
By using the on/off switch
progressively control the speed:
Pressure
Gentle pressure:
Greater pressure:
cannot be locked.
, you can
6 ]
[
Speed
Lower speed
Higher speed
Werbung
