Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Belt clip
(Fig. J)
The belt clip
is not assembled upon
[
9 ]
delivery.
The belt clip can be mounted on either side of a
belt (required tool: Cross tip screwdriver).
Loosen the belt clip's
Insert the belt clip
9 ]
[
product. Tighten the screw.
˜ Operation
˜ Attaching/removing the
battery pack
m
CAUTION! RISK OF INJURY!
Always lock the on/off switch
u
accidental starting by moving the rotation
direction switch
[
5 ]
(Lock) before attaching/removing the
battery pack
.
[
]
Removing the battery pack: Press the
battery pack release button
battery pack
(Fig. D).
[
]
Attaching the battery pack: Align the
battery pack
to the handle and slide it into
[
]
it. Ensure it clicks noticeably in place.
The battery pack can only be inserted into the
product in one direction.
16 GB
screw.
9 ]
[
on either side of the
to avoid
6 ]
[
into the centre position
. Remove the
[
]
˜ Checking the battery pack
charging level
(Fig. B)
Check battery pack charge level: Press the
button
. The charging level LEDs
[
]
light up:
LED
[
]
Red / orange / green
Red / orange
Red
˜ Charging the battery pack
(Fig. C)
NOTE
The battery pack
u
any time without reducing the life.
Interrupting the charging process does not
u
damage the battery pack
Charge the battery pack
when it is at medium or low charging level.
The charging control LEDs (green
) indicate the status of the charger
[
]
the battery pack
[
LED
Red LED lights up
Green LED lights up
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack)
Insert the battery pack
.
[
]
[
Charging level
Maximum
Medium
Low
may be charged at
[
]
.
[
]
before operation
[
]
and red
[
]
and
[
]
:
]
Status
Battery pack
charges
Battery pack fully
charged
Battery pack
defective
Battery pack too
cold or too warm
Charger ready
into the charger
[
]
]
Werbung
