Fora 6 Connect Bedienungsanleitung Seite 8

Transferring Data
Data Transmission Via Bluetooth
You can use your device with an iOS (5.0.1 or higher) or Android system (4.3 API
Level 18 or higher) to download data from your FORA 6 Connect via Bluetooth.
Follow the steps below to transmit data from your FORA 6 Connect. Please contact
your local customer service or place of purchase for assistance.
1. Install the software (iFORA HM) to your device with an iOS or
Android system.
2. Every time the FORA 6 Connect is turned off, the Bluetooth
will be initiated for data transmission. The Bluetooth indicator
flashes in blue.
3. Make sure your FORA 6 Connect is already paired with your
device with an iOS or Android system by following the instructions
as below.
Bluetooth Smart Meter
Add
Bluetooth Smart Meter
Search
Yes
EN-6
Note: This step is recommended when the user needs to pair this meter to a
Bluetooth receiver for the first time, or when the user needs to pair this meter to
another new Bluetooth receiver.
4. If your device with an iOS or Android system is within the receiving range, the data
transmission will start and the Bluetooth signals in blue. Once it is finished, the FORA
6 Connect will automatically switch off.
5. If your device with an iOS or Android system is not within the receiving range, the
FORA 6 Connect will automatically switch off in 2 minutes.
Note: • While the meter is in transmission mode, it will be unable to perform a blood
glucose test. • Make sure your device with iOS or Android system has turned on its
Bluetooth before transmitting the data and the meter is within the receiving range.
Maintenance
Changing Battery
You must change the battery immediately and reset the date and
time when the battery power is extremely low and "
appears on the screen. The meter cannot be turned on.
To change the battery, do the following:
1. Press the edge of the battery cover and lift it up to remove
the cover.
2. Remove the old battery and replace with one 1.5V AAA size
alkaline battery.
3. Close the battery cover. If the battery is inserted correctly, you
will hear a "beep" afterwards.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Note: • Replacing the battery does not affect the test results stored in memory. • Keep
away the battery from small children. If swallowed, promptly seek medical assistance.
• Battery may leak chemicals if unused for a long time. Remove the battery if you are
not going to use the device for an extended period. • Properly dispose of the used
battery according to your local environmental regulations.
Caring for Your Device
• To clean the exterior of the device, wipe it with a cloth moistened with tap water or
a mild cleaning agent, then dry the device with a soft dry cloth. Do NOT rinse with
water. • Do NOT use organic solvents to clean the device.
Device Storage
• Storage condition: -20°C to 60°C (-4°F to 140°F), and 10% to 93% relative humidity.
• Always store or transport the device in its original storage case. • Avoid dropping
and heavy impact. • Avoid direct sunlight and high humidity.
& "
CAUTION